OPHIR Single Cylinder Piston Airbrush Compressor with Tank & Fan for Hobby Model Tanning Wall Painting
In order not to burnt up the air compressor, please kindly confirm the voltage which you are going to use.
Then select the correct one for your own need.
This listing is for 110V US PLUG, if you need 220V EU PLUG, please kindly click the below link for reference:
OPHIR High Efficiency Air Compressor
It is perfect for your spray painting art, also for nails & temporary, tattoos, cake decorating,
craft painting, hobbies, commercial arts, illustrations, photo retouching and other airbrushing!!!
This High Performance compressor has been designed for users who need high quality spraying effect.
Using this item, it is believed that you can get from a beginner to become an advanced artist.
So don’t hesitate, just take it home!!!
OPHIR Airbrush Compressor cooerate with airbrush, can be widely used in craftwork spraying,
cosmetics, tattoo, tanning, hobbies/models, cake decoration, fingernail painting;
It can be also used for providing air source for medical, environmental protection, foot industrial, chemical industrial, laboratory and so on.
Air Compressor Features:
1. This is oil free piston type, there is no air polluted;
2. This air compressor has air tank to providing smooth air flow, zero pulse;
3. It has double air pressure switch:
Switch One: low pressure auto stop switch, for airbrush purpose;
Switch Two: high pressure auto stop switch, for other high pressure air tools;
4. It has air pressure gauge, air filter, and pressure adjustable;
5. It can start with pressure, continuous working, powerful;
6. It has thermally protection;
7. It's low noise, and it has safety protect devices for air tank.
Voltage: 110V-120V/60HZ; 220V-240V/50HZ
Type: Single Cylinder Piston Compressor With Air Tank
Speed: 1450/1700 r.p.m
Air Output Per Min./Liters: 20-23L/MIN
Switch One: Auto Start at 3BAR(43PSI), Auto Stop at 4BAR(57PSI)
Switch Two: Auto Start at 5BAR(70PSI), Auto Stop at 6BAR(86PSI)
Pressure Adjust Range: 0-6 bar
Air Tank: 3.0L
Suitable for all kinds of airbrush.
Air Hose Specification:
1/8" fitting on one end for connecting with airbrushes
1/8" fitting on one end for connecting with airbrush compressors
Regulator & Air Filter Description:
This regulator gives user control of operating pressure as well as assisting in furnishing clean,
Dry and regulated air.
1. The gauge reflects the working pressure of the air tools;
2. Pull the top button up; turn clockwise to increase the pressure;
3. Turn counter-clockwise to release the pressure;
4. Push the bottom needle to release the water.
1x Single Cylinder Piston Compressor(including 2pcs of holders)
1x 1.8m Air Hose
1x Air Filter